PHOENIX Fine Cut Polish is a water-based polishing compound, free of silicones and fillers. Thanks to its anti-hologram formula, it guarantees a deep gloss and brilliant finish by removing fine scratches and residues from the previous polishing stages.

It is ideal for final polishing of hard and soft paints, including scratch-resistant clear coats, OEM and repainted surfaces. Removes sanding marks up to P2500 grit without masking them.

How to use:

• Apply a small amount to the polishing pad.

• With rotary machine: start at 600–900 rpm, increase to 1500–1800 rpm, and reduce again to 600–900 rpm with light pressure.

• With random orbital machine: spread the product at speed 1–2 on a 40×40 cm area, polish with higher speed until fully finished.

• Wipe off the excess with a microfiber cloth.

• Use microfiber, wool, or soft pads accordingly.